Build Your Own Mars Pathfinder Spacecraft Model!
If you have ever wanted to have your very own model of the Mars Pathfinder
spacecraft, here is your chance to build one.
Click on the cutouts below to download, print and construct the model.
You will need scissors, tape and/or glue to put it together, and colored
markers or pencils to finish it up.
Here are some pictures of the real thing to inspire you!
If you're having problems downloading the model or need Instructions
for Downloading...
Note: The images you will be downloading are large
files. Your download time will depend on the speed of your modem...
We have also made up smaller files, less sharp
GIF versions of the images, that will still print out on 8.5"x11"
size paper.
Each image is sized to print on regular 8.5"x11" paper (landscape
orientation). Remember, the thicker the stock you print on, the sturdier
your model will be!
If you have questions on constructing the model, please contact
David Dubov (ddubov@pop.jpl.nasa.gov).
Please be specific!
| Contact information on this page is as it appeared during the
mission.
Direct all current requests to: marsoutreach@jpl.nasa.gov |
Have fun and good luck!
Sojourner and Mars Rover are trademarks of the California
Institute of Technology. Mars Rover, Lander and Aeroshell designs (c) 1996-7
California Institute of Technology, ALL RIGHTS RESERVED.
Permission for commercial reproduction other than for single-school
in-classroom use must be obtained from the JPL Commercial Programs Office.
Back to the Mars Pathfinder Education
and Outreach Home Page